CT PX End Caps
CT PX End Caps are designed for prestressed hollow core slabs with oval holes. CT PX End Caps are easy to use. The CT PX sits flat along the end of the slab
- designed for prestressed hollow core slabs with oval holes
- easy to fit into the channels
- hold the cap so the two square flaps sit in a vertical line
- apply pressure on the sides of the PX place the cap in the hole and let go when the two square flaps touch the end of the slab
- the sides of the PX will unfold and seal the hole
- sits flat along the end of the slab
- up to 36,000 on a full EUR pallet (CT PX18)
- made from regenerate PP (PolyPropylene)
- UV-light resistant
PX-Plug 18sis
Preparing for inserting a lifting anchor, a hole must be made through the concrete deck to the core channel. In either side of the chamber a CT-plug is inserted at the appropriate depth into the channel. The chamber is then filled up with liquid concrete. The CT-plug will stop the concrete flow when reaching the CT-plug. The lifting anchor is fixed to a recess former, fx the CT-AnchorBase, and inserted in the concrete.
PX-Plug 22
Use with prestressed hollow core slabs and concrete wall elements
PX-Plug 27sis
For decks 265mm/270mm
Preparing for inserting a lifting anchor, a hole must be made through the concrete deck to the core channel. In either side of the chamber a CT-plug is inserted at the appropriate depth into the channel. The chamber is then filled up with liquid concrete. The CT-plug will stop the concrete flow when reaching the CT-plug. The lifting anchor is fixed to a recess former, fx the CT-AnchorBase, and inserted in the concrete.